PRODUCTS
| Single Axis Lever | |
 |
·Small, robust single axis design ideal for replacement of hydraulic control levers in heavy duty applications such as construction equipment
·Proven, Hall effect sensing technology
·Life greater than 6 million cycles
·IP67 rated with fully potted electronics
·Standard ball grip
·R...
|
| Base Module AJ4 | |
 |
Joystick AJ4 with PWM ouput and CAN-bus SAE J1939 provides the reliability and long life required in demanding environmental conditions such as heavy duty industrial and mobile applications.
|
| Base Module AJ3 | |
 |
Joystick base module AJ3 provides the reliability required in demanding environment such as heavy duty industrial applications. The AJ3 provides both voltage output, PWM output and CAN-bus communication.
|
| MF-Grip SK | |
 |
Multifunction Joystick Grip SK is designed to be used for Joystick module type AJ3, but can also be used for other type of joysticks. The grip can accommodate up to 11 separate switches.
|
| MF-Grip S7 | |
 |
Multifunction Joystick Grip S7 is designed to be used for Joystick module type AJ4, but can also be used for other type of joysticks. The grip head is available in basically 8 different configurations with thumb wheel and on/off switches.
|
| MF-Grip S4 | |
 |
Multifunction Joystick Grip S4 is designed to be used for Joystick module type AJ4, but can also be used for other type of joysticks. The grip can accommodate both analog rockers ( AR3 ), analog thumb wheel ( AR4 ) and pushbuttons in basically 5 different head configurations.
|
| MF-Grip S3 | |
 |
Multifunction Joystick Grip S3 is designed to be used for Joystick module type AJ3, but can also be used for other type of joysticks. The grip can accommodate 2 analog rockers ( AR3 ), one in front side and one in rear side or 2 switch rockers ( SR3 ), 4 on/off switches ( optional ...
|
| MF-Grip S2 | |
 |
Multifunction Joystick Grip S2 is designed to be used for Joystick module type AJ3, but can also be used for other type of joysticks. The grip can accommodate 1 enabling switch (front side) and 1 switch rocker ( on top, thumb controlled ).
|
| MF-Grip S1 | |
 |
Multifunction Joystick Grip S1 is designed to be used for Joystick module type AJ3, but can also be used for other type of joysticks. The grip can accommodate 3 single switches and 1 switch rocker ( thumb controlled ).
|
Copyright © 2012-2021 Hzydro Inc. All Rights Reserved. 粤ICP备2021102244号